Cititech Industrial Engineering Pte Ltd

Google Presentation

Laser Cutting

Laser cutting is a technology that uses a laser to cut materials. Laser cutting works by directing the output of a high-power laser at the material to be cut. The material then melts, burns or vaporizes away. Any resulting molten material is blown way by pressurized gas leaving an edge with a high-quality surface finish.

Our machines are able to take in a maximum sheet size of 5 feet by 10 feet (1525mm x 3015mm).

Machine List:

1 x Mitsubishi 3015LVplus-60CFX 6000 Watt Laser Cutting System

1 x Mitsubishi 3015LVplus-40CFX 4000 Watt Laser Cutting System

1 x Bystronic Bystar 3015 (Decommissioned in Year 2017)

Positional i.e. hole to hole centres +/-0.20mm

Turret Punching

Punch Press uses a process of operation that begins with the CNC controller commanding the drives to move a particular axis to a desired position. Once in position, the control initiates the punching sequence and pushes the ram to Bottom Dead Centre and returns it to Top Dead Center. The punch enters the material, and pushes it through the die, obtaining the required shape of the punch and die set. This will form a piece of material that is ejected through the die and bolster plate and collected underneath the machine in scrap container.

Machine List:

2 x Amada CNC Turret Punch Press Pega 357

Milling / Lathe

Machining is a process that uses a machine tool to machine solid materials. Machining involves the movement of the work piece radically against the rotating milling cutter, which cuts on its sides as well as its tip. Work piece and cutter movement are precisely controlled to less than 0.001.

Machine List:

1 x CNC Cutter Pinnacle PK-VMC 850S

1 x CZ6232 Gap bed Lathe

1 x Dalian Machine Tool Group Lathe CD6256B

Press Break Bending

A press brake is a press used to bend, form or punch metal. It is a press that exerts a force on a set of dies that produces a V-shape, U-shape, or channel shape along a straight axis

Machine List:

2 x Amada Hydraulic Press Brake 8025E

1 x Amada F-BEST 1103

1 x Göteneds K25-25

1 x Durmazlar CNC HAP 40200

Pem Serting

Pem Serting is the process of installation of self clinching fasteners and studs into sheet metal parts. Done per customer requirements.

Machine List:

2 x PennEngineering PEMSERTER® Series 4®

Tapping, Countersinking, De Burring

These processes are all part of the manufacturing process to give a finished product done. Done per customer requirements.

Machine List:

1 x KTK Manual Feed Electrical Drilling and Tapping Machine LGT-550B

1 x KENT SURFACE GRINDER KGS-250AHD

1 x Birmingham Radial Drill TPR-1230H

Welding

Welding is a fabrication or sculptural process that joins materials, usually metals or thermoplastics, by causing coalescence. This is often done by melting the workpieces and adding a filler material to form a pool of molten material (the weld pool) that cools to become a strong joint, with pressure sometimes used in conjunction with heat, or by itself, to produce the weld. This is in contrast with soldering and brazing, which involve melting a lower-melting-point material between the workpieces to form a bond between them, without melting the workpieces.

Machine List:

1 x NASTOA SLP-35B5 Single phase A.C. spot welder

8 x TIG / MIG welding

Powder Coating, Painting, Anodising, Zinc Plating, Hot Dip Galvanization

Done in accordance with customer requirement.

Tubing and Bar Stock Cutting.

Complete Assembly Of Alu.Boxes, SUS Cabinets, Fire/water proof Marine Door.

Custom Made To Specification.

Local Delivery.

Request For Quote

Please call, fax or email (.pdf, .dwg, .dxf) anything you would like us to quote. Please include your contact, quantities, description or any other useful information.

Services not listed

Please call or email us for more information.